Skip to main content

Monday Motivation: Caring for your Cutting Board



As a kitchen tool that gets daily use, a good cutting board is worth the chunk of money you plunked down to buy it.  To get your money's worth it's best to take good care of this kitchen helper before  it gets ruined.

Wooden cutting boards are preferred by many cooks because they protect your knives and a large one is heavy enough to not slip around while you're cutting.  They also create a more pleasant sound when being cut on (versus ceramic or hard plastic) and will last forever.

With wooden cutting boards you need to sanitize the board as well as protect it.  To wash it you can wash it by hand with a scrub brush and dish washing liquid with very hot water.  Rinse and then air dry.  To sanitize it, scrub with salt and a half of a lemon.  Rinse with hot water and air dry standing on end. 
Don't ever wash a wooden cutting board in the dishwasher or let it sit and soak in the sink. 

To protect the board, coat it with oil whenever the surface starts to fade in color or look "thirsty".  There are cooks who say to only use mineral oil but I'm a little wary of using mineral oil on a cooking surface.  I prefer to use olive oil or coconut oil making sure oil is well absorbed before I store the board in the cupboard.  In the past, cooks were told to not use cooking oil because it could go rancid.  Newer boards that are used and washed regularly won't have a chance to go rancid.  You can decide what will work best for your kitchen.  Rory from Tools are for Women Too has a good post about protecting a cutting board.  He also makes nice boards that you can buy.

Plastic cutting boards are popular because they are so cheap to buy and come in many colors.  I think of them as being a short term solution because they get cut up quickly and will need to be discarded.  They are handy to pack in a picnic basket or for occasional use.  They can be washed in the dishwasher and need no protection.

I guess I should also mention ceramic/glass cutting boards even though I don't like them at all.  I can't stand to cut on them because of the awful sound that is made when the knife is cutting on the surface.  To me it's like fingernails on a chalkboard.  Yikes!  I also found out that they can be especially dulling to your knives.

Finally, even with sanitizing, you should have different cutting boards for different types of foods.  I have one board that is only for raw meat.  I wrote "Raw Meat" on the end of the board with permanent marker.  My other board is used for veggies and then I have another one that is for bread.


I'm having to activate the Word Verification Mode for a little while as I'm having a real problem with some spammers (yucky, mean spammers).  I'm so sorry for the inconvenience - please bear with me.

Comments

Popular posts from this blog

How To Make Your Own Exercise Bike For Next To Nothing

Remember back in April when I had a kidney transplant?  Well, the kidney is doing great (thanks, Cathy , for taking such good care of it when you owned it).  There was one little glitch, however.  During surgery, the retractors they used caused some nerve damage in my right leg.  When I woke up from surgery, I couldn't move or feel my leg.  The docs felt like the feeling would come back but the paralysis had them stumped.  A visit to a neurologist ruled out a stroke and a CT scan showed some fluid which was pressing on L4 and L5 (medical talk which means I couldn't feel or move part of my leg).  The prognosis is good and I'm recovering pretty quickly.  In fact, I've left my cane behind and I'm walking freestyle without falling.  My next goal is to be able to drive. I've been itching to get back to exercising (physical therapy doesn't count) because my medication causes me to gain weight and I need to burn some calories.  Running? - nope.  Walking? - can&

A Designer's Secret For A Taller Bed

  Several years ago Hubs and I spent almost a year looking for a bedroom set that we both loved.  He wanted clean lines and dark wood.  I wanted curves and a "tall" bed.  Of course, there was no perfect bedroom set but we were able to compromise on a set that we both liked.  My main wish was for a bed that I could "climb up into".  The problem with that wish was that most of the "tall" beds were four poster beds and Hubs was not in the mood for that.  We found a Thomasville bed on display at a local furniture store and it fit the clean lines that Hubs wanted and it was "tall"  enough to suit me.  The problem was that once we received the bed we ordered in our home, it wasn't as tall as I had remembered it being.  My heart sunk!  I went back to the furniture store to look at the display.  Their bed was much taller than our bed.  Hmmm. . . what was different? I got nosey and lifted up the comforter on the bed.  It revealed their secret

Plans For A DIY Exercise Bike Stand

  Thank you to so many of you who emailed me about plans for the DIY Exercise Bike Stand .  I apologize that it has taken me so long to get the measurements to you, but they are finally here!   The wood was purchased at Home Depot and the bike pegs were purchased at Walmart in the bike section.    The bike we used for this project is a 24" 12 speed bike (I'm a shorty).  I used the hardest gear while riding, but this set-up does not allow you to really get much resistance (for building muscle).  It was great for getting my legs moving after some nerve damage.  I also wanted to burn calories and get my heart rate up and this did the trick.    If you have any questions, just shoot me an email.