Skip to main content

Putting A New Finish On Old Hardware

When I refinished my bedside table, I loved everything about it except the worn out handles.  I knew they would not be easy to replace.  The shape was great but the finish was pathetic.


My easy (and free) solution was to use what I had on hand to add a new finish to the handles. 

In the photo below, the handle on the far left is the original finish.  It was worn and uneven.  I rubbed on some gold acrylic paint over the finish but I didn't try to get it into every crevice (middle handle).  After that layer dried, I lightly rubbed on some silver acrylic paint (far right).  I didn't worry about the finish being perfect because I wanted it to look vintage.  Lastly, I brushed on a water based sealant.  If I was using it on an often used handle, like in a kitchen or bath, I'd have used a poly product to hold up better. 


I tend to jump into projects when I get an idea in my head, so I sometimes don't get around to using proper tools.  Case in point:  using my fingers and pieces of paper towels to paint my handles.  But hey, it works!  So if you see me in person, don't question why I have paint in my fingernails.   


A nice surprise was finding out that the new handles match the finish on my bedside lamp. 


Comments

  1. I had a design consultation with a home interior designer. The plan was for her to go through my house with me, make recommendations and I would execute the design. For someone who works long hours, that takes a while.

    Her recommendation for hardware was to use the newer spray paints for metals. My walls are mostly close to a camel color with bone color trim. The hardware is rubbed bronze. It is gorgeous. The rooms that are green with the bronze are even more amazing.

    The spray paint has worked wonders for all the things (plate covers, towel bars, etc.) and has worn well.

    ReplyDelete
  2. Your bedside table looks great! I especially like what you did with the hardware. Again, you have inspired me to tackle another project!

    ReplyDelete
  3. Rita, I love using spray paint on hardward - quick, easy, and can take a beating! For this hardware I wanted a mottled look and I could get away using a different paint because of the light use it will get.

    Lottie, I can't wait to see what you'll work on next!

    ReplyDelete

Post a Comment

I'd love to know what you're thinking. Please feel free to leave ideas and comments.

Popular posts from this blog

How To Make Your Own Exercise Bike For Next To Nothing

Remember back in April when I had a kidney transplant?  Well, the kidney is doing great (thanks, Cathy , for taking such good care of it when you owned it).  There was one little glitch, however.  During surgery, the retractors they used caused some nerve damage in my right leg.  When I woke up from surgery, I couldn't move or feel my leg.  The docs felt like the feeling would come back but the paralysis had them stumped.  A visit to a neurologist ruled out a stroke and a CT scan showed some fluid which was pressing on L4 and L5 (medical talk which means I couldn't feel or move part of my leg).  The prognosis is good and I'm recovering pretty quickly.  In fact, I've left my cane behind and I'm walking freestyle without falling.  My next goal is to be able to drive. I've been itching to get back to exercising (physical therapy doesn't count) because my medication causes me to gain weight and I need to burn some calories.  Running? - nope.  Walking? - can&

A Designer's Secret For A Taller Bed

  Several years ago Hubs and I spent almost a year looking for a bedroom set that we both loved.  He wanted clean lines and dark wood.  I wanted curves and a "tall" bed.  Of course, there was no perfect bedroom set but we were able to compromise on a set that we both liked.  My main wish was for a bed that I could "climb up into".  The problem with that wish was that most of the "tall" beds were four poster beds and Hubs was not in the mood for that.  We found a Thomasville bed on display at a local furniture store and it fit the clean lines that Hubs wanted and it was "tall"  enough to suit me.  The problem was that once we received the bed we ordered in our home, it wasn't as tall as I had remembered it being.  My heart sunk!  I went back to the furniture store to look at the display.  Their bed was much taller than our bed.  Hmmm. . . what was different? I got nosey and lifted up the comforter on the bed.  It revealed their secret

Plans For A DIY Exercise Bike Stand

  Thank you to so many of you who emailed me about plans for the DIY Exercise Bike Stand .  I apologize that it has taken me so long to get the measurements to you, but they are finally here!   The wood was purchased at Home Depot and the bike pegs were purchased at Walmart in the bike section.    The bike we used for this project is a 24" 12 speed bike (I'm a shorty).  I used the hardest gear while riding, but this set-up does not allow you to really get much resistance (for building muscle).  It was great for getting my legs moving after some nerve damage.  I also wanted to burn calories and get my heart rate up and this did the trick.    If you have any questions, just shoot me an email.